The acoustic louvre, also known as an acoustic slat, acoustic grille, or louver, allows air to pass through while reducing noise escaping from openings: machine rooms, technical rooms, and noisy industrial areas. MECAVENT SA’s PERS acoustic louvres combine blades filled with absorbent material with weather protection, providing an overall attenuation of 10 to 18 dB(A) depending on the depth.
The PERS range at a glance:
Louvre attenuation is calculated by MECAVENT for each project, taking into account the airflow in the louvre section, the required sound pressure level at the defined point, and the sound power of the source. Send us your project data: we will provide a complete selection calculation, including pressure drop and the resulting sound pressure level.
| Model | Depth | Overall attenuation | Weight |
|---|---|---|---|
| PERS 200 | 200 mm | 10 dB(A) | 33 to 46 kg/m² |
| PERS 300 | 300 mm | 13 dB(A) | 43 to 58 kg/m² |
| PERS 400 | 400 mm | 15 dB(A) | 78 to 90 kg/m² |
| PERS 600 | 600 mm | 18 dB(A) | 86 to 116 kg/m² |
Overall attenuation on a reference spectrum. Standard widths from 200 to 2,500 mm, heights from 350 to 2,500 mm; any other dimension on request.
PERS acoustic louvres are made of galvanized steel sheet, raw or powder-coated in any RAL color (RAL 9010 as standard). Versions in stainless steel, aluminum, or other materials are available on request. The blades are filled with absorbent material protected by a perforated sheet; their inclination also allows for mounting at the end of a duct, either directly or with a frame.
Air intakes and exhausts for machine rooms and technical rooms, workshops, and noisy industrial areas, complementing an acoustic enclosure or a silencer to treat noise from an industrial ventilation installation.
These are three names for the same product: a frame equipped with absorbent blades that allows air to pass through while reducing noise. The term “louvre” is also commonly used.
It depends on the required attenuation and the allowable pressure drop: from 10 dB(A) for the PERS 200 to 18 dB(A) for the PERS 600. We perform the selection calculation for each project.
Opening dimensions, airflow, sound power of the source, required noise level and distance from the measurement point, mounting type, and desired finish. Louvres are delivered approximately 30 mm smaller than the opening to facilitate installation.
Plant rooms, heat pump enclosures and technical buildings need large air openings, but every opening lets noise escape. MECAVENT acoustic louvres solve this conflict: their deep, sound-absorbing blades let air pass with a low pressure drop while attenuating noise from fans, compressors and transformers.
We size acoustic louvres according to the airflow, the free area required and the noise reduction targeted at the nearest receiver. Blade depth, spacing and absorbing material are chosen to reach the required attenuation across the relevant frequency bands, with as little pressure drop as possible for your ventilation system.
Our acoustic louvres are made to measure to fit existing wall openings, enclosure panels or new facades. Frames and blades are available in galvanised steel, aluminium or stainless steel, with powder-coated finishes to match the building. Bird mesh, weather protection and removable sections for maintenance can be integrated.
Acoustic louvres are often combined with acoustic enclosures, duct silencers and noise barriers. We measure noise on site, calculate the expected levels and check the result after installation, helping operators meet local noise limits and the objectives of Directive 2002/49/EC on environmental noise.